BSA Owners Group

  • June 18, 2019, 03:10:57 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: [1] 2 3 4 ... 10
 1 
 on: June 13, 2019, 11:09:48 AM 
Started by theobean - Last post by Kelba1946
Surprised no one has commented yet.  I have an R10 Se in .22 FAC and love it, it's accurate has a good shot count but they are not without issues in standard trim. There are a number of things you can do to greatly improve them.

1.0 As the gun is 5 years old and seen little use it warrants a total strip and reseal, seals like to be under pressure all the time.  When I stripped mine which is a similar vintage it had a lot of oil floating around.
2.0 Polish the sears, the factory finish of the sears is frankly appalling with visible machining marks on the engagements and shows a poor regard for quality control.  The trigger is really sweet after polishing the sears, this is not a difficult job.
3.0 Consign the factory regulator to the bin where it rightfully belongs.  Fit a Huma this gives better shot count and very low variation in fps.
4.0 Fit a stainless steel pellet probe, sounds like the nickel plating on yours is starting to break down.  It the nickel gets into the barrel or other parts it can do significant damage.

Take a look at the videos on the XTX-Air website, they give full instructions for each job.  Also they supply both the Huma regulator, stainless probe and full seal kits.  As I said none of this is difficult if you are reasonably good with basic hand tools.  Do all the above you will end a with a reliable and very accurate gun that is a real joy to own and shoot.

Good luck.

 2 
 on: June 06, 2019, 12:43:18 PM 
Started by Allan-N - Last post by mattb
Welcome aboard Al

 3 
 on: June 05, 2019, 10:36:04 PM 
Started by Kastle - Last post by mattb
Hi,welcome aboard

 4 
 on: June 05, 2019, 10:35:07 PM 
Started by OldMrT - Last post by mattb
Hi,welcome aboard from just down the road

 5 
 on: June 05, 2019, 07:46:44 AM 
Started by mattb - Last post by mattb
Thanks Al

 6 
 on: June 04, 2019, 10:37:09 PM 
Started by OldMrT - Last post by Branthamal
What's going on ;-)

All new members lately are Al or from Kent?

 :hee20hee20hee:

 7 
 on: June 04, 2019, 10:23:59 PM 
Started by NewOnAir - Last post by Branthamal
Hey Kent ;-)

And yet another new joiner here too (and an ex-Ultra owner)

Al

 8 
 on: June 04, 2019, 10:22:20 PM 
Started by mattb - Last post by Branthamal
Hi Matt,

Al here, just joined too, breaking in a FAC Superten..
 :sign0144:

 9 
 on: June 04, 2019, 10:18:44 PM 
Started by Branthamal - Last post by Branthamal
Cheers Les, much obliged to you  :sign0098:

Thanks to Al 1 for popping in too  :c017:

 10 
 on: June 03, 2019, 01:24:09 PM 
Started by NewOnAir - Last post by mattb
Hello and welcome from a fellow newbie

Pages: [1] 2 3 4 ... 10