BSA Owners Group

  • August 19, 2018, 11:23:35 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: [1]   Go Down

Author Topic: Hi from (low power) Wales  (Read 118 times)

0 Members and 1 Guest are viewing this topic.

JonnyP

  • BSAOG Recruit
  • *
  • Offline Offline
  • Posts: 2
  • Postal Town: Cardiff
  • Postcode: Cf14
Hi from (low power) Wales
« on: May 17, 2018, 10:46:18 AM »

Hi, first post, looking for some tips and advice and possibly some shooting companions in and around Cardiff. I have an Ultra SE which has just been chronod at sub 8ft lbs, which explains why its never been that great a gun since Ive had it, tried a range of pellets and pressures but max 8, typically 7.5. Im about to return it to BSA as its under warranty, can anyone offer any advice as to what might be wrong with it? (it was purchased brand new and has only had light use) - Ive verified agains the springer which was bang on so not the chrono.
Logged

RANCiDTOM

  • Registered Firearms Dealer
  • BSAOG Technical Officer
  • *
  • Offline Offline
  • Posts: 16381
  • Postal Town: MANCHESTER (not Swindon)
  • Postcode: SN2
  • Not scared to speak the truth!
    • www.airgunclinic.co.uk
Re: Hi from (low power) Wales
« Reply #1 on: May 17, 2018, 01:55:43 PM »

First thing to check before sending it back to BSA is the pellet probe seal, it's easy to chage yourself if it is faulty, easy to test as well, load a pellet, place a tissue paper over the breech area and fire (obviously into a safe backstop). If the tissue paper moves then there is a leak. The .22 uses a 3 mm x 1.5 mm Nitrile 70 seal, the .177 uses a 2mm x 1.5mm Nitrile 70 seal, these are widely available, buy a pack of 10, they wear and can easily be damaged by bits of pellet skirt or by nickel flakes that fall off the BSA pellet probe. It's a 5 minute fix with a pair of circlip pliers, why suffer the wait and possible bill from BSA if they decide they won't cover a pellet probe seal? It's a wearing part, much like a windscreen wiper blade on a car so may not be covered by warranty.
Logged
My postcode isn't SN2 it's M21!
GMP Registered Firearms Dealer
Gunsmith for AirGunClinic
http://www.airgunclinic.co.uk  back up and running...

JonnyP

  • BSAOG Recruit
  • *
  • Offline Offline
  • Posts: 2
  • Postal Town: Cardiff
  • Postcode: Cf14
Re: Hi from (low power) Wales
« Reply #2 on: May 17, 2018, 03:49:06 PM »

Thanks for the advice, I did change the pellet probe and filling probe seals as part of the fact finding exercise, but to no avail - great tip though - thank you
« Last Edit: May 17, 2018, 06:49:37 PM by JonnyP »
Logged

1066

  • BSAOG Snr Marksman
  • *****
  • Offline Offline
  • Posts: 2285
  • Postal Town: Runcorn, via Africa and parts unknown.
  • Postcode: WA7
Re: Hi from (low power) Wales
« Reply #3 on: May 17, 2018, 04:54:14 PM »

Hello Jonny .... welcome to the BSAOG!   :welcome:
Logged
Les

Plwm

  • BSAOG Recruit
  • *
  • Offline Offline
  • Posts: 7
  • Postal Town: Brecon
  • Postcode: LD3 8TE
Re: Hi from (low power) Wales
« Reply #4 on: May 29, 2018, 06:41:03 PM »

Hi Jonny

Fraid I can't help with your low power Ultra. I do however live up near Brecon if your ever up this way....

Cheers, Neil
Logged
Pages: [1]   Go Up